home *** CD-ROM | disk | FTP | other *** search
/ SGI Freeware 1999 August / SGI Freeware 1999 August.iso / dist / fw_tcpdump.idb / usr / freeware / lib / tcpdump / README.z / README
Encoding:
Text File  |  1999-04-16  |  8.4 KB  |  209 lines

  1. @(#) $Header: README,v 1.54 98/01/27 21:36:20 vern Exp $ (LBL)
  2.  
  3. TCPDUMP 3.4
  4. Lawrence Berkeley National Laboratory
  5. Network Research Group
  6. tcpdump@ee.lbl.gov
  7. ftp://ftp.ee.lbl.gov/tcpdump.tar.Z
  8.  
  9. This directory contains source code for tcpdump, a tool for network
  10. monitoring and data acquisition.  The original distribution is
  11. available via anonymous ftp to ftp.ee.lbl.gov, in tcpdump.tar.Z.
  12.  
  13. Tcpdump now uses libpcap, a system-independent interface for user-level
  14. packet capture.  Before building tcpdump, you must first retrieve and
  15. build libpcap, also from LBL, in:
  16.  
  17.     ftp://ftp.ee.lbl.gov/libpcap.tar.Z
  18.  
  19. Once libpcap is built (either install it or make sure it's in
  20. ../libpcap), you can build tcpdump using the procedure in the INSTALL
  21. file.
  22.  
  23. The program is loosely based on SMI's "etherfind" although none of the
  24. etherfind code remains.  It was originally written by Van Jacobson as
  25. part of an ongoing research project to investigate and improve tcp and
  26. internet gateway performance.  The parts of the program originally
  27. taken from Sun's etherfind were later re-written by Steven McCanne of
  28. LBL.  To insure that there would be no vestige of proprietary code in
  29. tcpdump, Steve wrote these pieces from the specification given by the
  30. manual entry, with no access to the source of tcpdump or etherfind.
  31.  
  32. Over the past few years, tcpdump has been steadily improved by the
  33. excellent contributions from the Internet community (just browse
  34. through the CHANGES file).  We are grateful for all the input.
  35.  
  36. Richard Stevens gives an excellent treatment of the Internet protocols
  37. in his book ``TCP/IP Illustrated, Volume 1''. If you want to learn more
  38. about tcpdump and how to interpret its output, pick up this book.
  39.  
  40. Some tools for viewing and analyzing tcpdump trace files are available
  41. from the Internet Traffic Archive:
  42.  
  43.     http://www.acm.org/sigcomm/ITA/
  44.  
  45. Another tool that tcpdump users might find useful is tcpslice:
  46.  
  47.     ftp://ftp.ee.lbl.gov/tcpslice.tar.Z
  48.  
  49. It is a program that can be used to extract portions of tcpdump binary
  50. trace files. See the above distribution for further details and
  51. documentation.
  52.  
  53. Problems, bugs, questions, desirable enhancements, source code
  54. contributions, etc., should be sent to the email address
  55. "tcpdump@ee.lbl.gov".
  56.  
  57.  - Steve McCanne
  58.    Craig Leres
  59.    Van Jacobson
  60. -------------------------------------
  61. This directory also contains some short awk programs intended as
  62. examples of ways to reduce tcpdump data when you're tracking
  63. particular network problems:
  64.  
  65. send-ack.awk
  66.     Simplifies the tcpdump trace for an ftp (or other unidirectional
  67.     tcp transfer).  Since we assume that one host only sends and
  68.     the other only acks, all address information is left off and
  69.     we just note if the packet is a "send" or an "ack".
  70.  
  71.     There is one output line per line of the original trace.
  72.     Field 1 is the packet time in decimal seconds, relative
  73.     to the start of the conversation.  Field 2 is delta-time
  74.     from last packet.  Field 3 is packet type/direction.
  75.     "Send" means data going from sender to receiver, "ack"
  76.     means an ack going from the receiver to the sender.  A
  77.     preceding "*" indicates that the data is a retransmission.
  78.     A preceding "-" indicates a hole in the sequence space
  79.     (i.e., missing packet(s)), a "#" means an odd-size (not max
  80.     seg size) packet.  Field 4 has the packet flags
  81.     (same format as raw trace).  Field 5 is the sequence
  82.     number (start seq. num for sender, next expected seq number
  83.     for acks).  The number in parens following an ack is
  84.     the delta-time from the first send of the packet to the
  85.     ack.  A number in parens following a send is the
  86.     delta-time from the first send of the packet to the
  87.     current send (on duplicate packets only).  Duplicate
  88.     sends or acks have a number in square brackets showing
  89.     the number of duplicates so far.
  90.  
  91.     Here is a short sample from near the start of an ftp:
  92.         3.00    0.20   send . 512
  93.         3.20    0.20    ack . 1024  (0.20)
  94.         3.20    0.00   send P 1024
  95.         3.40    0.20    ack . 1536  (0.20)
  96.         3.80    0.40 * send . 0  (3.80) [2]
  97.         3.82    0.02 *  ack . 1536  (0.62) [2]
  98.     Three seconds into the conversation, bytes 512 through 1023
  99.     were sent.  200ms later they were acked.  Shortly thereafter
  100.     bytes 1024-1535 were sent and again acked after 200ms.
  101.     Then, for no apparent reason, 0-511 is retransmitted, 3.8
  102.     seconds after its initial send (the round trip time for this
  103.     ftp was 1sec, +-500ms).  Since the receiver is expecting
  104.     1536, 1536 is re-acked when 0 arrives.
  105.  
  106. packetdat.awk
  107.     Computes chunk summary data for an ftp (or similar
  108.     unidirectional tcp transfer). [A "chunk" refers to
  109.     a chunk of the sequence space -- essentially the packet
  110.     sequence number divided by the max segment size.]
  111.  
  112.     A summary line is printed showing the number of chunks,
  113.     the number of packets it took to send that many chunks
  114.     (if there are no lost or duplicated packets, the number
  115.     of packets should equal the number of chunks) and the
  116.     number of acks.
  117.  
  118.     Following the summary line is one line of information
  119.     per chunk.  The line contains eight fields:
  120.        1 - the chunk number
  121.        2 - the start sequence number for this chunk
  122.        3 - time of first send
  123.        4 - time of last send
  124.        5 - time of first ack
  125.        6 - time of last ack
  126.        7 - number of times chunk was sent
  127.        8 - number of times chunk was acked
  128.     (all times are in decimal seconds, relative to the start
  129.     of the conversation.)
  130.  
  131.     As an example, here is the first part of the output for
  132.     an ftp trace:
  133.  
  134.     # 134 chunks.  536 packets sent.  508 acks.
  135.     1       1       0.00    5.80    0.20    0.20    4       1
  136.     2       513     0.28    6.20    0.40    0.40    4       1
  137.     3       1025    1.16    6.32    1.20    1.20    4       1
  138.     4       1561    1.86    15.00   2.00    2.00    6       1
  139.     5       2049    2.16    15.44   2.20    2.20    5       1
  140.     6       2585    2.64    16.44   2.80    2.80    5       1
  141.     7       3073    3.00    16.66   3.20    3.20    4       1
  142.     8       3609    3.20    17.24   3.40    5.82    4       11
  143.     9       4097    6.02    6.58    6.20    6.80    2       5
  144.  
  145.     This says that 134 chunks were transferred (about 70K
  146.     since the average packet size was 512 bytes).  It took
  147.     536 packets to transfer the data (i.e., on the average
  148.     each chunk was transmitted four times).  Looking at,
  149.     say, chunk 4, we see it represents the 512 bytes of
  150.     sequence space from 1561 to 2048.  It was first sent
  151.     1.86 seconds into the conversation.  It was last
  152.     sent 15 seconds into the conversation and was sent
  153.     a total of 6 times (i.e., it was retransmitted every
  154.     2 seconds on the average).  It was acked once, 140ms
  155.     after it first arrived.
  156.  
  157. stime.awk
  158. atime.awk
  159.     Output one line per send or ack, respectively, in the form
  160.         <time> <seq. number>
  161.     where <time> is the time in seconds since the start of the
  162.     transfer and <seq. number> is the sequence number being sent
  163.     or acked.  I typically plot this data looking for suspicious
  164.     patterns.
  165.  
  166.  
  167. The problem I was looking at was the bulk-data-transfer
  168. throughput of medium delay network paths (1-6 sec.  round trip
  169. time) under typical DARPA Internet conditions.  The trace of the
  170. ftp transfer of a large file was used as the raw data source.
  171. The method was:
  172.  
  173.   - On a local host (but not the Sun running tcpdump), connect to
  174.     the remote ftp.
  175.  
  176.   - On the monitor Sun, start the trace going.  E.g.,
  177.       tcpdump host local-host and remote-host and port ftp-data >tracefile
  178.  
  179.   - On local, do either a get or put of a large file (~500KB),
  180.     preferably to the null device (to minimize effects like
  181.     closing the receive window while waiting for a disk write).
  182.  
  183.   - When transfer is finished, stop tcpdump.  Use awk to make up
  184.     two files of summary data (maxsize is the maximum packet size,
  185.     tracedata is the file of tcpdump tracedata):
  186.       awk -f send-ack.awk packetsize=avgsize tracedata >sa
  187.       awk -f packetdat.awk packetsize=avgsize tracedata >pd
  188.  
  189.   - While the summary data files are printing, take a look at
  190.     how the transfer behaved:
  191.       awk -f stime.awk tracedata | xgraph
  192.     (90% of what you learn seems to happen in this step).
  193.  
  194.   - Do all of the above steps several times, both directions,
  195.     at different times of day, with different protocol
  196.     implementations on the other end.
  197.  
  198.   - Using one of the Unix data analysis packages (in my case,
  199.     S and Gary Perlman's Unix|Stat), spend a few months staring
  200.     at the data.
  201.  
  202.   - Change something in the local protocol implementation and
  203.     redo the steps above.
  204.  
  205.   - Once a week, tell your funding agent that you're discovering
  206.     wonderful things and you'll write up that research report
  207.     "real soon now".
  208.  
  209.